Hikvision propose une formation et des démonstrations sur les caméras multi-capteurs à ISC East

décembre 6, 2018

Les produits PanoVu d’Hikvision sont des composants essentiels des solutions pour la vente au détail, l’hôtellerie, le transport et l’éducation.

NEW YORK — nov. 13, 2018 - Hikvision USA Inc., le principal fournisseur d'équipements et de solutions de sécurité, assurera une formation et des démonstrations de sa technologie de caméra multi-capteurs à ISC East, qui se déroulera au Jacob Javits Center de New York le 29 novembre. 14 et 15.

Hikvision exposera du kiosque 324 dans la salle d'exposition les deux jours. Outre les caméras multi-capteurs, Hikvision présentera également des solutions de contrôle d'accès et d'interphone. Le mercredi 14 novembre de 11h30 à 12h30 Dans la salle 1A23, Hikvision proposera une session de formation gratuite intitulée "Aperçu de PanoVu: systèmes innovants pour la vente au détail, l'éducation, l'hôtellerie et bien plus encore". Cliquez ici  pour plus d'informations et pour vous inscrire.

"Idéal pour les applications de vente au détail, d'accueil, de transport et d'éducation, les produits PanoVu de Hikvision offrent la technologie multicaméras dans un seul appareil facile à installer", a déclaré Eric Chen, directeur général, Hikvision Amérique du Nord. "Nous sommes ravis de discuter et de faire la démonstration de cette technologie clé pour les intégrateurs et les utilisateurs au ISC East cette année."

Hikvision propose une grande variété de produits PanoVu pour répondre aux besoins de chaque installateur : des angles de vues à 180 et 360 degrés dans une image assemblée à partir de plusieurs caméras, en passant par des caméras à cardan ajustables pour une vue optimale. Une large sélection de caméras est disponible pour les applications intérieures ou les visionnages extérieurs à longue portée. Les applications courantes incluent les entrepôts, les grands espaces ouverts, les halls d’entrée, les centres-villes, les lieux de divertissement et les ports.

Pour vous tenir au courant des dernières nouvelles sur Hikvision, suivez-nous sur Twitter @HikvisionUSAinc et @HikvisionCanada.

 

À propos d'Hikvision:

Hikvision est un fournisseur de premier plan d’intelligence artificielle, d’apprentissage automatique, de robotique et d’autres technologies émergentes. Il est également le premier fabricant mondial de vidéosurveillance. Hikvision, qui possède une main-d'œuvre nombreuse et hautement qualifiée dans la recherche et le développement, fabrique une gamme complète de produits et de solutions complets destinés à un large éventail de marchés verticaux. Au-delà de la sécurité, les produits Hikvision fournissent aux utilisateurs finaux des données et une intelligence d'affaires importantes, qui peuvent être utilisées pour permettre un succès commercial plus important et des opérations plus efficaces. Soucieux de garantir la qualité et la sécurité maximales de ses produits, Hikvision encourage ses partenaires à tirer parti des nombreuses ressources en cybersécurité offertes par Hikvision, y compris le Centre de sécurité Hikvision

###

Martha Entwistle, directrice principale, Communications stratégiques                                                                                           

Hikvision USA Inc.                                                                                                                   

Martha.entwistle@hikvision.com

IMPORTANT! Ce modèle nécessite un logiciel non standard. N'installez pas de logiciel standard (par exemple, v.4.1.xx) sur ce modèle. Cela endommagerait définitivement votre système. Vous devez utiliser le logiciel personnalisé v.4.1.25 à partir de la page du produit iDS-9632NXI-I8/16S

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the DS-76xxNI-Q1(2)/P NVRs, also known as “Q series.”

 

These changes do not have any effect on the performance, specifications, or the user interface of the NVRs. For the ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

 

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

 

  • The C-Version NVRs must use firmware version v4.31.102 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v4.30.085 or older.

 

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the Value Express Series NVRs

These changes do not have any effect on the performance and specification of the recorders. For ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

  • The C-Version NVRs must use firmware version v4.30.216 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v3.4.104 or older.

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

En téléchargeant et en utilisant des logiciels et autres matériels disponibles sur ce site, vous acceptez d'être lié par les Conditions Générales d'Utilisation de HIKVISION. Si vous n'acceptez pas ces conditions, vous ne pouvez télécharger aucun de ces documents. Si vous êtes d'accord sur votre entreprise, vous déclarez et garantissez que vous avez le pouvoir de lier votre entreprise aux Conditions Générales d'Utilisation . Vous déclarez et garantissez également que vous avez l'âge légal de la majorité dans la juridiction dans laquelle vous résidez (au moins 18 ans dans de nombreux pays).