Hikvision participe à la 5ème levée de fonds annuelle de Security Softball Game de Mission 500 : plus de 41 000 $ collectés pour aider des enfants américains vivant dans la pauvreté

septembre 23, 2019

Hikvision HikWire blog article SDM Security Industry Softball Game

Les membres de l’industrie de la sécurité à la 5ème édition du jeu annuel de balle molle de Mission 500. La collecte de fonds a rapporté plus de 41 000$ à des enfants vivant dans la pauvreté aux États-Unis.

Hikvision USA a participé au 5ème jeu annuel de balle molle de Mission 500, une association à but non lucratif, se joignant à d’autres membres du secteur de la sécurité afin de collecter des fonds pour les enfants vivant dans la pauvreté aux États-Unis. La levée de fonds a rapporté plus de 41 000 $ et s'est déroulée le dimanche 15 septembre au parc Overpeck County de Ridgefield Park, New Jersey.

L'événement a débuté avec un coup de circuit derby. Plus de deux douzaines de participants ont joué au softball pour collecter des fonds et soutenir divers programmes de Mission 500 qui fournissent des fournitures essentielles et un soutien aux enfants et aux familles. Les participants ont rassemblé des sacs à dos avec des fournitures scolaires et ont rédigé des notes d'espoir pour 400 enfants vivant dans l'extrême pauvreté dans le sud du Bronx, New York.

Hikvision a aidé à parrainer l'événement. John Centofanti, responsable des comptes nationaux chez Hikvision, s’est porté volontaire à la table des inscriptions, a aidé à remplir des sacs à dos avec des fournitures et a joué à la balle molle.

Mission 500 a fait don de 2 500$ des fonds recueillis lors de l’événement au camp pour enfants de la Fondation des New York Firefighters Burn Center, un organisme à but non lucratif dédié à la promotion des soins, de la recherche, de la prévention et de l’éducation contre les brûlés. Le camp est conçu pour que les victimes de brûlures de moins de 18 ans assistent à un événement estival amusant où elles peuvent oublier leurs brûlures. C’est la 3e année consécutive que Mission 500 apporte son soutien au camp.

“Nous sommes ravis de célébrer notre 5e anniversaire cette année. Nous avons la chance d’avoir bénéficié d’un soutien exceptionnel de la part de l’industrie au cours des cinq dernières années et nous sommes impatients d’atteindre notre objectif de 50 000 $ cette année’’, a déclaré Tom Nolan, directeur des partenariats stratégiques pour Mission 500, dans le cadre d’un événement annoncé par le magazine SDM.

Pour ceux qui veulent soutenir Mission 500, il est encore temps de faire un don au fond du Security Softball Game via ce lien.

Les membres de l'équipe Hikvision Amérique du Nord sont des partenaires actifs de Mission 500 et ont participé à de nombreux événements au cours de la dernière année. Il y a eu un voyage de service en novembre 2018 à Porto Rico où ils ont aidé les victimes de l'ouragan Maria à reconstruire leurs maisons, ainsi qu’une activité de construction de kit en décembre 2018 pour les enfants du primaire à East Hartford, dans le Connecticut. Il a aussi eu la Classique de hockey de février 2019 à Toronto, la course Security 5 / 2K à ISC West 2019, de même que la fabrication de trousses en août 2019 destinée à fournir des sacs à dos remplis de fournitures scolaires aux élèves de l'école primaire Crosspointe, à Boynton Beach, en Floride.

 

IMPORTANT! Ce modèle nécessite un logiciel non standard. N'installez pas de logiciel standard (par exemple, v.4.1.xx) sur ce modèle. Cela endommagerait définitivement votre système. Vous devez utiliser le logiciel personnalisé v.4.1.25 à partir de la page du produit iDS-9632NXI-I8/16S

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the DS-76xxNI-Q1(2)/P NVRs, also known as “Q series.”

 

These changes do not have any effect on the performance, specifications, or the user interface of the NVRs. For the ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

 

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

 

  • The C-Version NVRs must use firmware version v4.31.102 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v4.30.085 or older.

 

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the Value Express Series NVRs

These changes do not have any effect on the performance and specification of the recorders. For ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

  • The C-Version NVRs must use firmware version v4.30.216 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v3.4.104 or older.

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

En téléchargeant et en utilisant des logiciels et autres matériels disponibles sur ce site, vous acceptez d'être lié par les Conditions Générales d'Utilisation de HIKVISION. Si vous n'acceptez pas ces conditions, vous ne pouvez télécharger aucun de ces documents. Si vous êtes d'accord sur votre entreprise, vous déclarez et garantissez que vous avez le pouvoir de lier votre entreprise aux Conditions Générales d'Utilisation . Vous déclarez et garantissez également que vous avez l'âge légal de la majorité dans la juridiction dans laquelle vous résidez (au moins 18 ans dans de nombreux pays).