Hikvision Releases Five New ColorVu Cameras, Including an LPR Dome and Camera/DVR Kits

April 26, 2023

Hikvision Releases Five New ColorVu Cameras,  

Including an LPR Dome and Camera/DVR Kits

AI, ColorVu Technology, and Kits All Increase the Value of Growing Lineup

City of Industry, CA (April 25, 2023) – Hikvision, a world-leading manufacturer and supplier of security products and solutions that deliver the ideal combination of high performance and extreme value, brings an April shower of new cameras leveraging ColorVu technology for excellent high-quality color images day or night. These new cameras include panoramic, turret, and bullet models to cover the widest range of application needs with five new models in all. These latest additions to Hikvision’s lineup of emerging security technologies were developed in response to market demand for security products that deliver reliable high-performance operation and extreme value.

“Our ColorVu technology delivers industry-leading color image performance for our security partners and their customers, maximizing the value and effectiveness of their security camera investments,” said John Xiao, Vice President of Marketing, Hikvision USA. “By incorporating proven, highly effective AI along with ColorVu, we are delivering on Hikvision’s commitment to achieving true physical-cybersecurity convergence and helping organizations meet their service and security objectives.”   

Hikvision’s ColorVu is an innovative low-light camera technology that utilizes advanced image processing algorithms and built-in lighting to provide color images even in the darkest environments. All five new camera models employ ColorVu for outstanding images in both daylight and nighttime. Select new models also include Hikvision’s impressive AI analytic technologies to gain insights, find patterns, and discover relationships in the data to redefine and enhance security systems.

Two of the new Hikvision models are the ColorVu panoramic network cameras available in 6 MP or 4K turret and bullet models. This camera line offers outstanding 24/7 color imaging paired with Hikvision’s AI-driven intelligent event detection that can trigger visible, audible, and network alarms in response to events of interest. These cameras feature:

  • 24/7 colorful imaging
  • Efficient H.265+ compression technology
  • Clear imaging against strong backlight due to 130 dB WDR technology
  • Focus on human and vehicle classification based on deep learning
  • Active strobe light and audio alarm to warn intruders off
  • Water and dust resistance (IP67)

Hikvision has also introduced three new 5 MP ColorVu TurboHD Kits joining its line of ColorVu products. These offer the perfect solution for your video security needs with 24/7 full color and intelligent, advanced tracking with Motion Detection 2.0. With Motion Detection 2.0, you’ll never miss a thing—it allows you to focus on human and vehicle events with instant alarms and handy search functions. These bundled kits are easy-to-install solutions with quality cameras and properly sized DVRs:

  • Model T7204U1TA4C includes four 5 MP TurboHD ColorVu Turret Cameras and a 4-channel DVR with 1 TB HDD.
  • Model T7208U2TA6C includes six 5 MP TurboHD ColorVu Turret Cameras and an 8-channel DVR with 2 TB HDD.  
  • Model T7216U4TA12C includes twelve 5 MP TurboHD ColorVu Turret Cameras and a 16-channel DVR with 4 TB HDD.

Included in the new ColorVu additions is a 4 MP License Plate Recognition (LPR) for advanced plate detection and full color video day and night. The LPR camera supports comprehensive parking lot management for improved safety, efficiency, and cost-effectiveness. This camera is compatible with third-party software, and ideal for vehicle access authentication, vehicle direction detection, and vehicle counting at entering or exiting. Features include:

  • High quality imaging with 4 MP resolution
  • Excellent low-light performance via ColorVu technology
  • Efficient H.265+ compression technology to save bandwidth and storage
  • Clear imaging against strong backlight due to 140 dB true WDR technology
  • 5 streams to meet a wide variety of applications
  • Water and dust resistant (IP67) and vandal proof (IK10)
  • Unique PTRZ capability for efficient installation

For more information, please visit: https://info.hikvision.com/find-your-local-team.

About Hikvision  
Hikvision is a world leading manufacturer and supplier of security products and solutions. Featuring an extensive and highly skilled R&D workforce, Hikvision manufactures a full suite of comprehensive products and solutions for a broad range of vertical markets. In addition to security, Hikvision extends its reach to smart home tech, industrial automation, and automotive electronics industries. Hikvision solutions provide powerful business intelligence for end users, which can enable more efficient operations and greater commercial success. Hikvision encourages partners to take advantage of its many cybersecurity resources, such as the 
Hikvision Cybersecurity Center. For more information, please visit us at www.hikvision.com.  

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the DS-76xxNI-Q1(2)/P NVRs, also known as “Q series.”

 

These changes do not have any effect on the performance, specifications, or the user interface of the NVRs. For the ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

 

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

 

  • The C-Version NVRs must use firmware version v4.31.102 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v4.30.085 or older.

 

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the Value Express Series NVRs

These changes do not have any effect on the performance and specification of the recorders. For ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

  • The C-Version NVRs must use firmware version v4.30.216 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v3.4.104 or older.

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).