Hikvision Supports School Security and Success for Students with Disabilities

January 14, 2017

Hikvision provided cameras used for instruction and security at Kids World in Utah

 

 

CITY OF INDUSTRY, Calif. —January 16, 2017— Hikvision USA Inc., the North American leader in innovative, award-winning video surveillance products, delivered a new security system that will be used for classroom instruction as well as security at Kids World, a non-profit school for students with disabilities, located in Taylorsville, Utah.

 

The system was installed over the holidays. Since its founding in 2005, Kids World has helped students (pre-school to 7th grade) with a variety of challenging disabilities, said Kids World founder Brandon Francis. “We help students get their behavior, social skills, and academics to the point where they can be successful in school and in their community,” Francis said. “We become a family to our students and I always hate to see them graduate our program, but it’s great to see them confident and ready to flourish in their next educational setting.” 

 

Several Kids World graduates have moved on to public school settings. One child, who was non-verbal initially, started speaking after participating in an auditory therapy program at Kids World. 

 

The Hikvision solution replaced an outdated system. Cameras are used for security when the school is vacant, during recess on the school’s playground, in the classrooms, and in the pick-up/drop-off area. Inside the classrooms, teachers use video for monitoring and visual feedback. 

 

Kids World’s new Hikvision system is designed for very easy installation, versatility and is ideally suited to a small education-vertical environment. The system includes three Hikvision DS-2CD2432F-IW 3MP Indoor IR Wifi Cube cameras; one DS-2CD2542FWD-IWS 4MP WDR Mini Dome Network camera; four DS-2CD2132F-IWS MP Vandal-proof Network Dome cameras; and a DS-7716NI-I4/16P Embedded Plug & Play 4K NVR, with a built-in POE switch.

 

All of the cameras feature higher definition, affording better security and better coverage for the safety of the children. The outdoor cameras provide a wide coverage area for effective perimeter protection. The indoor cameras are low profile, which makes them unobtrusive in the classroom. The 4MP indoor dome camera features very wide, 106-degree coverage for the classroom, and all indoor cameras have audio recording capability, which Kids World teachers will use for instructional purposes. All of the cameras are also Wifi capable for a dynamic range of deployment opportunities.

 

Kids World has two classrooms and 16- to 20 students. In addition to regular school hours, Kids World offers one-on-one therapy, tutoring and after-school programs. 

 

Hikvision has solutions that are tailored specifically to the education market, with systems that are appropriate for a wide variety of K-12 and higher education applications. “We’re particularly pleased to provide technical expertise and video surveillance equipment to help support Kids World teachers and students,” said Alex Asnovich, director of marketing for Hikvision USA. “This is one example of the many ways that Hikvision invests in the communities where we do business,” he added.   

 

A few years ago, Kids World moved from its original location in a commercial park to a residential neighborhood. “I did an extensive study and found that a home-like environment is the most beneficial for students with and without disabilities. This type of environment helps students feel safe, secure, and at home. As a result, students have a higher self-esteem, are more ready to learn, have higher outcomes, and feel less anxiety then in a commercial building,” Francis said. “The Hikvision cameras will really make a difference for our students and their families, providing security and a helping hand in the classroom too,” Francis added. 

 

 

About Hikvision

Hikvision is the world’s leading supplier of video surveillance solutions. Featuring the industry’s strongest R&D workforce, Hikvision designs, develops, and manufactures standard- and high-definition cameras, including a variety of IP cameras, analog cameras, and cameras featuring the latest in high-definition analog technology. Hikvision’s product suite also includes digital video servers, hybrid and standalone DVRs, NVRs, and other elements of sophisticated security systems for both indoor and outdoor use. 

 

###

 

Alex Asnovich, Director of Marketing

Hikvision USA Inc.

alex.asnovich@hikvision.com

312-576-1025

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the DS-76xxNI-Q1(2)/P NVRs, also known as “Q series.”

 

These changes do not have any effect on the performance, specifications, or the user interface of the NVRs. For the ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

 

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

 

  • The C-Version NVRs must use firmware version v4.31.102 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v4.30.085 or older.

 

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the Value Express Series NVRs

These changes do not have any effect on the performance and specification of the recorders. For ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

  • The C-Version NVRs must use firmware version v4.30.216 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v3.4.104 or older.

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).