“Fun Safe Philly Summer” Provides Secure Alternative for City Youth

April 13, 2015

• “Fun Safe Philly Summer” provides secure alternative for city youth
• Video surveillance system deters potential threats

Hikvision Products in Use at City of Philadelphia
• DS-2CD7254 3MP WDR Outdoor Network Camera
• DS-2CD753F 2MP Vandal Resistant Network Dome Camera
• DS-2CD7153E 2MP Network Mini Dome Camera
• DS-9616NI-ST High-end Embedded NVR
• DS-9632NI Embedded NVR
• iVMS 4200 Video Management Software

Reasons City of Philadelphia selected Hikvision Products
• Unified video surveillance solution linked into a central management system
• Affordable cameras and VMS system with a simple licensing scheme
• Scalable networked system
• Durable, vandal-proof and outdoor cameras


Introduction
With a population of over 1.5 million residents, Philadelphia is the United States’ fifth most populous city. Home to many national historical sites, the city is known for arts and culture, and also serves as Pennsylvania’s center of economic activity as home to several Fortune 500 companies.

Known as “The City of Brotherly Love,” the city’s ethnic populations provide cultural diversity for which the city is well known. Coupling population diversity with the East Coast’s second largest student concentration, it’s clear that city public safety officials face significant challenges that must be addressed to ensure safety for city residents and visitors.

Philadelphia also boasts a wealth of outdoor venues and Recreation Centers, providing city youth with opportunities to participate in structured activities. City and Rec Center staff aim for the centers to be safe havens where kids and teens can get involved with sports, art and learning as a healthy alternative to the potentially dangerous allure of inner city street life.

In the summer of 2014, the City of Philadelphia promoted the “Fun Safe Philly Summer” initiative to connect youth and their families to free and low-cost summer activities. The program comprised events at Recreation Centers throughout the city.

Serving thousands of Philadelphians each year, the Department of Parks and Recreation understands that situational awareness is critical to mitigate risks that come from security and safety vulnerabilities at city Recreation Centers. To ensure the success of the “Fun Safe Philly Summer” initiative, Parks and Recreation officials, led by Susan Slawson, Deputy Commissioner of Parks and Recreation, acknowledged the value of using video surveillance to deter crime in high risk areas.


Requirements
Recognizing a need for surveillance capabilities, Parks and Recreation staff worked closely with City of Philadelphia engineers to develop a high standard for CCTV system design. Using the video surveillance system as a deterrent, the City of Philadelphia sought to curb unlawful and dangerous activity at basketball courts, stairways, exits and entryways in and around the Rec Centers.

In implementing the system, the Parks and Recreation department recognized that they would need to connect disparate security services to collaborate on strategy, technology and effective mutual communication. Existing public safety technology solutions meant that each municipal department was potentially operating on a different system, so it was crucial to provide a unified video surveillance solution in the recreation centers that could be linked into a central management system. As infrastructure would be gradually upgraded throughout the city, they needed to find a system that could stay intact during the project.

The system had to be affordable with a simple licensing scheme for cameras and VMS. For future expansion, the system needed to be scalable so that it could be networked. Also, to cover the needs of this application, the city needed durable, vandal-proof and outdoor cameras as well.


Solution
After carefully considering their needs and evaluating a broad variety of market offerings, the city selected high-performance video surveillance cameras, NVRs, and VMS technology from Hikvision to protect the city.

Hikvison’s reliable feature-rich VMS 4200 Video Management Software was an ideal solution to enable system components to easily communicate with each other and with units made by other manufacturers. Philadelphia-based security system integrators also installed Hikvision 2MP and 3MP network cameras in several of the recreation centers to take advantage of the cameras’ wide dynamic range and true day/night functionality.

In addition to gathering footage from the immediate vicinity, the cameras installed at recreation facilities capture clear images of surrounding areas, such as activity across the street. The security team monitors footage from cameras stationed on building exteriors to keep an eye on would-be perpetrators and vandals.


Results
The video surveillance systems have been hugely successful in keeping the Recreation Centers safe. Commissioner Slawson reports that the success of this initiative was a key factor in convincing the city council to pledge budget investment to outfit all 140 Rec Centers with CCTV by 2016. The cost efficiency of Hikvision products, combined with their innovative technology, allows for greater return on investment. This gives the city the ability to outfit more recreation centers, creating a safer environment overall.

A 20-year veteran of the Philadelphia Police Department, Commissioner Slawson well understands the importance of comprehensive surveillance in relation to crime reduction. Superior image quality from Hikvision cameras at the city’s recreation centers plays a key role in coordination with the police.

“Where we were faced with vandalism, loitering, and burglaries before, the numbers decreased immediately once we outfitted our facilities with cameras,” said Susan Slawson. “With the introduction of Hikvision video surveillance equipment, not only are we covering our sites, we can also tell what’s going on in the streets and coordinate with the police department if need be.”


Conclusion
Urban environments equipped with little or legacy security technologies mean that surveillance systems are stretched to the limit in many areas. As the Philadelphia Parks and Recreation initiative illustrates, video surveillance can enhance a safe city, providing a whole new life for recreational facilities whose use had eroded due to negative influences. With Hikvision products in use, Commissioner Slawson is encouraged that Philadelphia youth will be able to use these valuable Parks and Recreation resources long into the future. “We don’t just want a ‘fun, safe, Philly summer;’ we want a fun, safe, Philly,” she reports.

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the DS-76xxNI-Q1(2)/P NVRs, also known as “Q series.”

 

These changes do not have any effect on the performance, specifications, or the user interface of the NVRs. For the ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

 

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

 

  • The C-Version NVRs must use firmware version v4.31.102 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v4.30.085 or older.

 

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the Value Express Series NVRs

These changes do not have any effect on the performance and specification of the recorders. For ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

  • The C-Version NVRs must use firmware version v4.30.216 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v3.4.104 or older.

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).