SecurityInfoWatch.com on Ways to Protect Your Organization’s Data, Improve Cybersecurity

October 12, 2018

Hikvision Offers Cybersecurity Best Practices, Tips to Avoid Phishing, Malware

Hikvision Offers Cybersecurity Best Practices, Tips to Avoid Phishing, Malware

 

In the SecurityInfoWatch.com (SIW) article, “Don’t let poor data security become your organization’s biggest liability,” the author offers advice to help organizations better protect their data from security breach, and be more data resilient if hit with a malware attack.

From the article: “As the amount of private and confidential data grows, compliance should no longer be an option, but a requirement. At the same time, cybercrime is evolving to become more sophisticated and unpredictable. WannaCry, one of the most notable ransomware strains of 2017, targeted computers running on older Microsoft Windows operating systems. It was a new variant of malware that automatically spread itself, installing backdoors onto infected systems and infiltrating users’ computers through the network, bypassing the usual step of the user opening an email. Early in 2018, ransomware attacks against Atlanta and Baltimore disrupted critical emergency services and resulted in the loss of critical data.”

How to Protect Data When Dealing with Ransomware

Ransomware is a cybersecurity attack that uses malware to exploit a system vulnerability. According to the article, the U.S. Government’s Department of Homeland Security (DHS) made recommendations that organizations implement best practices such as provide employee security training, update software in a timely manner, and perform frequent data backups.

The article also offers three strategic actions organizations can take to improve data recovery after a malware attack:

  1. Use data backup and recovery plans to ensure resilience if a ransomware attack were to occur
  2. Employ data access management and encryption to minimize the effect of malware
  3. Store data in multiple locations in different geographies to improve data recovery and resilience

Employees and Data Security

Referencing Coca-Cola’s data security breach due to unauthorized employee access, the author recommends the following actions to improve organizational control over data:

  1. Develop an internal policy that requires “access limitations across the organization, which only grant data access to the roles requiring the data in a usable format to perform their jobs.” Ensure that you select a solution that offers the ability to set up these role-based permissions.
  2. Create a culture of security that includes “organization-specific best practices for sending, opening and saving files.”

More on Data Control

The cloud and GDPR present new opportunities to improve the way data is handled, stored and protected, according to SIW. To meet regulatory standards and to improve cybersecurity, the author recommends a strong industry-standard encryption such as FIPS 140-2, cryptographic policy enforcement, data destruction, access auditing and integrated key management.

 

To read the full article, click here.

Hikvision Offers Cybersecurity Best Practices

Hikvision has offered cybersecurity best practices for partners to reduce risk of security breach and minimize concerns. Efforts have included the following cybersecurity initiatives:

Hikvision also recently announced its achievement of the U.S. Government Federal Information Processing Standard (FIPS) 140-2 Level 1 certification, an encryption standard created by the U.S. National Institute of Standards and Technology (NIST) for its encryption module (HikSSL) to be used in both IP camera and NVR products.

In addition, Hikvision has written numerous cybersecurity blogs with best practices, tips and insights. Visit us online for more.

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the DS-76xxNI-Q1(2)/P NVRs, also known as “Q series.”

 

These changes do not have any effect on the performance, specifications, or the user interface of the NVRs. For the ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

 

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

 

  • The C-Version NVRs must use firmware version v4.31.102 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v4.30.085 or older.

 

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the Value Express Series NVRs

These changes do not have any effect on the performance and specification of the recorders. For ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

  • The C-Version NVRs must use firmware version v4.30.216 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v3.4.104 or older.

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).