Hikvision Megapixel Cameras Secure 2014 FIFA World Cup Brazil

June 25, 2014

Hikvision, the global leader of video surveillance products and technologies, has been selected to provide comprehensive security solutions to safeguard 2014 FIFA World Cup Brazil -- the biggest event on the planet. The security projects include Brazil’s BRT MOVE bus stations and Mineirao stadium in Belo Horizonte, a host city for the World Cup. Hundreds of Hikvision megapixel network cameras and speed domes have been successfully applied to ensure a safer environment for local citizens and visiting tourists.

 


When it comes time for the Belo Horizonte Traffic Agency to choose a primary security camera, they rely upon Hikvision to make sure both their quality and safety needs are successfully addressed. As such, over 300pcs of Hikvision DS-2CD864F-E 1.3MP WDR network cameras were selected to be installed at the Brazil BRT MOVE bus stations to protect citizens, visitors and their property effectively.

 

This camera, designed with excellent low light capability, allows enhanced imaging performance in low light scenarios with minimum illumination of 0.6Lux @ F1.2 in color mode and 0.08Lux @ F1.2 in B/W mode. In addition, 3D digital noise reduction and true day / night ensure excellent image quality regardless of time of day as well as a resolution of 1280x960.

 

Benefitting from the superior megapixel images delivered by this camera, security personnel will be able to easily identify suspicious individuals and objects at bus stations and their surroundings. The high quality video images could also be provided for forensic purposes if needed.

 

The other remarkable project for the World Cup is the Hikvision security solution for Mineirao stadium surroundings.

 

Mineirao stadium, one of the most iconic venues in Brazilian football, underwent two and a half years of renovation to transform the stadium into a modern, safe, and sustainable arena, with room for over 62,000 spectators. It will be the venue for a total of 6 matches for the World Cup.

 

Hikvision, along with the Military Police of Minas Gerais (PMMG), designed an IP surveillance solution for the streets around the stadium. 74pcs of Hikvision DS-2DF1-57A 1MP high speed domes in total were installed for World Cup security purposes and city surveillance. These Hikvision network speed domes are primarily tasked to protect fans and visitors against riots.

 

The Hikvision DS-2DF1-57A offers a 1280x960 resolution at 25 to 30 frames per second, with an 360° endless pan range at a speed of 540°/s, and a -5°-90° tilt range at a speed of 400°/s . This allows the speed domes to immediately zoom onto moving objects and deliver crystal-clear images, regardless of outdoor light. This is an extremely important feature, since the police need to quickly and accurately recognize and respond to riots or other crime, establishing a secure environment for the World Cup.

 

According to Alvaro de Souza, CCTV manager at VMI Sistemas de Seguranca, Brazil’s official Hikvision Distributor, “Hikvision cameras with megapixel resolution come to meet a real need in the city of Belo Horizonte and for the Military Police of Minas Gerais for identification of suspects, supporting decision making for strategic military actions and protecting citizens during and after the World Cup 2014. Design, image quality, durability, maintenance and local support were key points for this wonderful solution to be chosen. I consider it a major milestone in the history of the Belo Horizonte and this project complements a great legacy of thousands of Hikvision cameras already installed in Brazil."

 

IMPORTANT! This model requires non-standard firmware. Do Not Install standard firmware (e.g. v.4.1.xx) on this model. Doing so will permanently damage your system. You must use custom firmware v.4.1.25 from the iDS-9632NXI-I8/16S product page.

View the most updated version of this document here:

https://techsupportca.freshdesk.com/en/support/solutions/articles/17000113531-i-series-nvr-firmware-upgrade-instructions

 

The I-series NVR (such as the DS-7716NI-I4) is one of Hikvision's most popular and feature-rich recorders. As such, many firmware revisions have been introduced over the years to continually ensure the product is compatible with the newest technology available. Due to the many revisions, we recommend that the user closely follows the instructions below in order to reduce the amount of time spent as well as the chance of failure.

 

Database Optimization and Repair

As more affordable IP cameras are introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.

 

After upgrading to v4.X, the recorder database will need to be converted and optimized. If you are experiencing issues where playback is expected but not found, make sure "Database Repair" is performed as indicated in the procedures and scenarios below.

 

Preparing the Upgrade

Before proceeding with upgrade, it is recommended that NVR configuration file is exported from the NVR over the network or on to a local USB drive.

 

Upgrading from v3.4.92 build 170518 or Older

  1. All recorders must reach v3.4.92 before proceeding further. Upgrading from versions before v3.4.92 directly to any version of v4.X will likely cause the recorder to fail.
  2. If the recorder is already at v3.4.92, a full factory default is highly recommended before upgrading to any version of v4.X. There is a high chance of unit failure (requiring RMA) if the unit is not defaulted before upgrade.
  3. After reaching v3.4.92 and performing a full factory default, an upgrade directly to v4.50.00 is acceptable.
  4. After the upgrade is completed and the recorder is reprogrammed, it may be beneficial to perform a Database Repair. For details, refer to the section "Database Optimization and Repair" above.
  5. To verify repair progress, you may refer to the HDD status, or search the recorder log for repair started and stopped entries. Note that while the HDD is repairing, new recordings are still being made, but some existing recordings may not be searchable until repair is complete.
  6. If you continue to observe playback issues after database repair, ensure there are no power, network, or motion detection issues. Should the problem persist, contact technical support.

 

Upgrading from Any v4.X Build to v4.50.00.

  1. Any v4.X build can be upgraded directly to v4.50.00.
  2. Export configuration is highly recommended before performing the upgrade.
  3. If upgrading from any v4.X version that was not v4.22.005, a Database Repair is recommended. Refer to Step 4 and onwards in the previous section.

 

Downgrading

Downgrading is not recommended. Due to new features and parameters constantly being added, downgrading may cause the NVR to factory default itself or require a manual default to operate properly.

View the most updated version of this document here:
K-Series DVR upgrade instruction
The Turbo 4 Hybrid DVR K series has multiple models and across different platform and chipset. It also has similar firmware development of other recording product line; DVR K series has also introduced the GUI4.0 to ensure the series to be compatible to the newest technology available. The new database architecture is also brought into the DVR firmware v4.0 to be future proof and for better recording search experience. 
 


Database Optimization and Repair

As more affordable cameras introduced over time with greater video resolution and data sizes, more efficient database management also becomes necessary. The introduction of firmware v4.0 brought about a new database architecture in order to be futureproof.
After upgrading to v4.X, the recorder database will need to be converted and optimize. If you are experiencing issues, where playback is expected but not found, please make sure to perform "Database Rebuild" as indicated in the procedures and scenarios below.
 


Preparing the Upgrade

Before proceeding with upgrade, it is recommend exporting DVR configuration file from the DVR over the network or on to a local USB drive.

 

Action after firmware upgraded 

1. Upgrade the DVR according to the chart above. 

2. Reconfirming Channel's Recording Schedule 

    - Confirm channel's recording schedule is enable. 

    - Check if the channel is on correct recording schedule.

3. Double Check Storage Setting

    - Make sure all channel are assigned to record on its HDD group when the Storage setting is under Group Mode. 

4. Perform Database Rebuild locally. 

    • Some version above support Database Rebuild via web access - K51 and K72

    • Perform Database Rebuild regardless if system is having any database issue symptom. 

    • Database Rebuild process is average ~30 to 60min per TB. The process may still varies depends recording data.

    • After Database Rebuild - Check log to confirm Database Rebuild has went thru properly. 

    • If Database Rebuild Started and Stopped log has been log only within few minutes. Database rebuild may not has been completed properly. It is strongly recommend performing the Database Rebuild again.

    • To check log > System > Log > Information > Database Rebuild Started and Stopped.

    • If the log option is not available - access system via SSH can also obtain similar result.

5. Recording Data is still missing after database rebuild process. 

If the data has not been recorded or has been overwritten, Database rebuild process is not able retrieve those lost data. Have the system upgraded to the latest available firmware version above to prevent any future data lost is strongly recommended for all application.

 

 

 

 

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the DS-76xxNI-Q1(2)/P NVRs, also known as “Q series.”

 

These changes do not have any effect on the performance, specifications, or the user interface of the NVRs. For the ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

 

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

 

  • The C-Version NVRs must use firmware version v4.31.102 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v4.30.085 or older.

 

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

In light of the global semiconductor shortage, Hikvision has made some hardware changes to the Value Express Series NVRs

These changes do not have any effect on the performance and specification of the recorders. For ease of reference, these modified units are known as “C-Version” units. This is clearly indicated on the NVR label and on the box by the serial number.

The only difference between the “C-Version” and “non-C-Version” is the firmware. The firmware is not interchangeable:

  • The C-Version NVRs must use firmware version v4.30.216 or higher.
  • The non-C-Version (Q series) NVRs must use firmware version v3.4.104 or older.

Please do not be alarmed if a “Firmware Mismatch” message pops up on the screen during the firmware upgrade. This simply means that the firmware does not match the NVR’s hardware. Simply download the correct firmware and the upgrade will go through without any issue.

By downloading and using software and other materials available via this website, you agree to be legally bound by HIKVISION General Terms of Use . If you don’t agree to these terms, you may not download or use any of those materials.

If you are agreeing on behalf of your company, you represent and warrant that you have legal authority to bind your company to the General Terms of Use above. Also you represent and warrant that you are of the legal age of majority in the jurisdiction in which you reside (at least 18 years of age in many countries).